A quantitative method for determination of colistin E2 methanesulphonate in human plasma by 15N-labeled colistin E2.

The single-component colistin E2, with superior antibacterial activity and lower toxicity, was being developed as the latest generation of polymyxin drugs. However, colistin E2 has not been tested quantitatively in biological matrices. In this study, based on the quantitative detection of colistin methanesulphonate (CMS) and colistin by Zhao et al., 15N-labeled colistin E2 was used as an internal standard (IS) for a more accurate quantitative detection of CMS E2 in human plasma. A rapid ultra-high-performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS) assay method was developed for determination of CMS E2 and colistin E2 in human plasma. After pretreatment of plasma samples by 96-well SPE Supra-Clean Weak Cation Exchange (WCX) plate, the formed colistin E2 was detected and quantified by UHPLC-MS/MS system. All plasma lots were found to be free of interferences with the analyte. The matrix has no effect on the quantitation of the analyte. No significant effect of the carryover was observed. The dilution integrity was demonstrated in plasma samples without the loss of accuracy and precision. The lower limit of quantification (LLOQ) was 0.0300 mg/L for colistin E2 in plasma with accuracy (relative error, 5.1-12.7%) and precision (relative standard deviation, - 5.7-9.3%). Stability of CMS E2 and colistin E2 was demonstrated in biological samples before and during sample treatment, and in the extract. Furthermore, this method was successfully applied to the analysis of plasma samples obtained from Chinese healthy volunteers receiving a single intravenous CMS E2 dose of 5 mg/kg. In conclusion, the detection method was characterized by speed and high accuracy, which laid a solid foundation for the subsequent development of CMS E2 drug.

Structural biology of MCR-1-mediated resistance to polymyxin antibiotics.

Polymyxins, a last resort antibiotic, target the outer membrane of pathogens and are used to address the increasing prevalence of multidrug-resistant Gram-negative bacteria. The plasmid-encoded enzyme MCR-1 confers polymyxin resistance to bacteria by modifying the outer membrane. Transferable resistance to polymyxins is a major concern; therefore, MCR-1 is an important drug target. In this review, we discuss recent structural and mechanistic aspects of MCR-1 function, its variants and homologs, and how they are relevant to polymyxin resistance. Specifically, we discuss work on polymyxin-mediated disruption of the outer and inner membranes, computational studies on the catalytic mechanism of MCR-1, mutagenesis and structural analysis concerning residues important for substrate binding in MCR-1, and finally, advancements in inhibitors targeting MCR-1.

Enhancement by pyrazolones of colistin efficacy against mcr-1-expressing E. coli: an in silico and in vitro investigation.

Owing to the emergence of antibiotic resistance, the polymyxin colistin has been recently revived to treat acute, multidrug-resistant Gram-negative bacterial infections. Positively charged colistin binds to negatively charged lipids and damages the outer membrane of Gram-negative bacteria. However, the MCR-1 protein, encoded by the mobile colistin resistance (mcr) gene, is involved in bacterial colistin resistance by catalysing phosphoethanolamine (PEA) transfer onto lipid A, neutralising its negative charge, and thereby reducing its interaction with colistin. Our preliminary results showed that treatment with a reference pyrazolone compound significantly reduced colistin minimal inhibitory concentrations in Escherichia coli expressing mcr-1 mediated colistin resistance (Hanpaibool et al. in ACS Omega, 2023). A docking-MD combination was used in an ensemble-based docking approach to identify further pyrazolone compounds as candidate MCR-1 inhibitors. Docking simulations revealed that 13/28 of the pyrazolone compounds tested are predicted to have lower binding free energies than the reference compound. Four of these were chosen for in vitro testing, with the results demonstrating that all the compounds tested could lower colistin MICs in an E. coli strain carrying the mcr-1 gene. Docking of pyrazolones into the MCR-1 active site reveals residues that are implicated in ligand-protein interactions, particularly E246, T285, H395, H466, and H478, which are located in the MCR-1 active site and which participate in interactions with MCR-1 in ≥ 8/10 of the lowest energy complexes. This study establishes pyrazolone-induced colistin susceptibility in E. coli carrying the mcr-1 gene, providing a method for the development of novel treatments against colistin-resistant bacteria.

EptA of Riemerella anatipestifer mediates phenotypes involved in colistin resistance and virulence.

Colistin (polymyxin E) is a group of cationic antimicrobial cyclic peptides and is recognized as a last-resort defense against lethal infections with carbapenem-resistant pathogens. In addition to the plasmid-borne mobilized phosphoethanolamine (PEA) transferases, the functional expression of lipid A-modifying enzymes encoded on chromosomes has been attributed to intrinsic bacterial colistin resistance. However, the mechanisms of colistin resistance in Riemerella anatipestifer remain unknown. Herein, the GE296_RS09715 gene-encoded Lipid A PEA transferases (RaEptA) was identified in R. anatipestifer. Genetic and structural analyses revealed that the amino acid sequence of RaEptA shared 26.6%-33.1% similarities with the family of Lipid A PEA transferases (EptA) and MCR-like proteins and have defined 12 residues that contribute to the formation of phosphatidylethanolamine (PE)-recognizable cavities. Comparative analyses of colistin resistance in RA-LZ01 and RA-LZ01ΔRaEptA showed the level of colistin has fallen from 96 µg mL-1 down to 24 ~ 32 µg mL-1 . Site-directed mutagenesis assay of the PE-binding cavity and expression of the mutants reveals that K309-rRaEptA can remodel the surface of Escherichia coli and rendering it resistant to colistin, suggesting this point-mutation of P309K is necessary for EptA-mediated lipid A modification. Moreover, the virulence of RA-LZ01ΔRaEptA was attenuated compared with RA-LZ01 both in vivo and vitro. Taken together, the results represent the RaEptA involved in the colistin resistance and pathogenicity, and the P309K mutation might alter bacterial adaptation and increase the spread of colistin resistance from R. anatipestifer to other gram-negative bacteria. The findings of this study suggest another scenario for the spread of colistin resistance genes and should be considered by a wide audience.

Critical Role of Position 10 Residue in the Polymyxin Antimicrobial Activity.

Polymyxins (polymyxin B and colistin) are lipopeptide antibiotics used as a last-line treatment for life-threatening multidrug-resistant (MDR) Gram-negative bacterial infections. Unfortunately, their clinical use has been affected by dose-limiting toxicity and increasing resistance. Structure-activity (SAR) and structure-toxicity (STR) relationships are paramount for the development of safer polymyxins, albeit very little is known about the role of the conserved position 10 threonine (Thr) residue in the polymyxin core scaffold. Here, we synthesized 30 novel analogues of polymyxin B1 modified explicitly at position 10 and examined the antimicrobial activity against Gram-negative bacteria and in vivo toxicity and performed molecular dynamics simulations with bacterial outer membranes. For the first time, this study revealed the stereochemical requirements and role of the ß-hydroxy side chain in promoting the correctly folded conformation of the polymyxin that drives outer membrane penetration and antibacterial activity. These findings provide essential information for developing safer and more efficacious new-generation polymyxin antibiotics.

Improved Aerosolization Stability of Inhalable Tobramycin Powder Formulation by Co-Spray Drying with Colistin.

PURPOSE: Tobramycin shows synergistic antibacterial activity with colistin and can reduce the toxic effects of colistin. The purpose of this study is to prepare pulmonary powder formulations containing both colistin and tobramycin and to assess their in vitro aerosol performance and storage stability. METHODS: The dry powder formulations were manufactured using a lab-scale spray dryer. In vitro aerosol performance was measured using a Next Generation Impactor. The storage stability of the dry powder formulations was measured at 22°C and two relative humidity levels - 20 and 55%. Colistin composition on the particle surface was measured using X-ray photoelectron spectroscopy. RESULTS: Two combination formulations, with 1:1 and 1:5 molar ratios of colistin and tobramycin, showed fine particle fractions (FPF) of 85%, which was significantly higher than that of the spray dried tobramycin (45%). FPF of the tobramycin formulation increased significantly when stored for four weeks at both 20% and 55% RH. In contrast, FPF values of both combination formulations and spray dried colistin remained stable at both humidity levels. Particle surface of each combination was significantly enriched in colistin molecules; 1:5 combination showed 77% by wt. colistin. CONCLUSIONS: The superior aerosol performance and aerosolization stability of 1:1 and 1:5 combination formulations of colistin and tobramycin could be attributed to enrichment of colistin on the co-spray dried particle surface. The observed powder properties may be the result of a surfactant-like assembly of these colistin molecules during spray drying, thus forming a hydrophobic particle surface.

Hyaluronan-colistin conjugates: Synthesis, characterization, and prospects for medical applications.

The development of nanotechnology-based antibiotic delivery systems (nanoantibiotics) is an important challenge in the effort to combat microbial multidrug resistance. These systems have improved biopharmaceutical characteristics by increasing local bioavailability and reducing systemic toxicity and the number and frequency of drug side effects. Conjugation of low -molecular -weight antibacterial agents with natural polysaccharides is an effective strategy for developing optimal targeted delivery systems with programmed release and reduced cytotoxicity. This study describes the synthesis of conjugates of colistin (CT) and hyaluronic acid (HA) using carbodiimide chemistry to conjugate the amino groups of CT with the carboxyl groups of HA. The obtained polysaccharide carriers had a degree of substitution (DS) with CT molecules of 3-10 %, and the CT content was 129-377 µg/mg. The size of the fabricated particles was 300-600 nm; in addition, there were conjugates in the form of single macromolecules (30-50 nm). The ζ-potential of developed systems was about -20 mV. In vitro release studies at pH 7.4 and pH 5.2 showed slow hydrolysis of amide bonds, with a CT release of 1-5 % after 24 h. The conjugates retained antimicrobial activity depending on the DS: at DS 8 %, the minimum inhibitory concentration (MIC) of the conjugate corresponded to the MIC of free CT. The resulting systems also reduced CT nephrotoxicity by 20-50 %. These new conjugates of CT with HA are promising for the development of nanodrugs for safe and effective antimicrobial therapy.

A new self-immolative colistin prodrug with dual targeting functionalities and reduced toxicity for the treatment of intracellular bacterial infections.

Colistin is a potent antibiotic but its severe side effects including nephrotoxicity and neurotoxicity are the roadblock for their wide use in clinics. To solve this problem, we synthesized a new prodrug, mannose-maltose-colistin conjugate, termed MMCC that can reversibly mask the five amines of colistin that are primarily responsible for the toxicity. The deliberated design of disulfide-based self-immolative linker warranted the reversibly release of the pristine amines of colistin on demand without sacrificing antimicrobial efficacy. Once MMCC was delivered in cells, reducing agents cleaves the disulfide bond and release the pristine amines. The targeting ligands of maltose and mannose were grafted on colistin conjugate for targeting delivery of colistin to bacteria and macrophages, respectively. Taken together, MMCC as a new class of antimicrobial biomaterials, demonstrates its great potential for the treatment of intracellular bacterial infections.

Deep Mutational Scanning Reveals the Active-Site Sequence Requirements for the Colistin Antibiotic Resistance Enzyme MCR-1.

Colistin (polymyxin E) and polymyxin B have been used as last-resort agents for treating infections caused by multidrug-resistant Gram-negative bacteria. However, their efficacy has been challenged by the emergence of the mobile colistin resistance gene mcr-1, which encodes a transmembrane phosphoethanolamine (PEA) transferase enzyme, MCR-1. The enzyme catalyzes the transfer of the cationic PEA moiety of phosphatidylethanolamine (PE) to lipid A, thereby neutralizing the negative charge of lipid A and blocking the binding of positively charged polymyxins. This study aims to facilitate understanding of the mechanism of the MCR-1 enzyme by investigating its active-site sequence requirements. For this purpose, 23 active-site residues of MCR-1 protein were randomized by constructing single-codon randomization libraries. The libraries were individually selected for supporting Escherichia coli cell growth in the presence of colistin or polymyxin B. Deep sequencing of the polymyxin-resistant clones revealed that wild-type residues predominates at 17 active-site residue positions, indicating these residues play critical roles in MCR-1 function. These residues include Zn2+-chelating residues as well as residues that may form a hydrogen bond network with the PEA moiety or make hydrophobic interactions with the acyl chains of PE. Any mutations at these residues significantly decrease polymyxin resistance levels and the PEA transferase activity of the MCR-1 enzyme. Therefore, deep sequencing of the randomization libraries of MCR-1 enzyme identifies active-site residues that are essential for its polymyxin resistance function. Thus, these residues may be utilized as targets to develop inhibitors to circumvent MCR-1-mediated polymyxin resistance. IMPORTANCE Polymyxin antibiotics are used as last-line antibiotics in treating infections caused by multidrug-resistant pathogens. However, widespread use of polymyxins has led to the emergence of resistance. Although multiple mechanisms for resistance exist, that due to mcr-1 is a particular concern, as it can be readily transferred among bacterial pathogens. The mcr-1 gene encodes a transmembrane phosphoethanolamine (PEA) transferase that modifies lipid A to block the binding of polymyxin antibiotics. We utilized random mutagenesis coupled with next-generation sequencing to determine the amino acid sequence requirements of 23 residues in and near the active site of MCR-1. We show that the enzyme has stringent sequence requirements, with 75% of the residues examined being essential for function. Coupled with the finding that these residues are largely conserved among PEA enzymes, the results suggest inhibitors that bind near these sites will broadly inhibit MCR-1 and other enzymes of this class.

Protein-Based Films as Antifouling and Drug-Eluting Antimicrobial Coatings for Medical Implants.

Nosocomial infections, caused by bacterial contamination of medical devices and implants, are a serious healthcare concern. We demonstrate here, the use of fluorous-cured protein nanofilm coatings for generating antimicrobial surfaces. In this approach, bacteria-repelling films are created by heat-curing proteins in fluorous media. These films are then loaded with antibiotics, with release controlled via electrostatic interactions between therapeutic and protein film building blocks to provide bactericidal surfaces. This film fabrication process is additive-free, biocompatible, biodegradable, and can be used to provide antimicrobial coatings for both three-dimensional (2D) and 3D objects for use in indwelling devices.

Evaluation of ceftazidime/avibactam alone and in combination with amikacin, colistin and tigecycline against Klebsiella pneumoniae carbapenemase-producing K. pneumoniae by in vitro time-kill experiment.

Klebsiella pneumoniae carbapenemase-producing K. pneumoniae (KPC-Kp) poses a major threat to human health worldwide. Combination therapies of antibiotics with different mechanisms have been recommended in literatures. This study assessed in vitro antibacterial activities and synergistic activities of ceftazidime/avibactam alone and in combinations against KPC-Kp. In total, 70 isolates from 2 hospitals in Beijing were examined in our study. By using the agar dilution method and broth dilution method, we determined the minimum inhibitory concentration (MIC) of candidate antibiotics. Ceftazidime/avibactam demonstrated promising susceptibility against KPC-Kp (97.14%). Synergistic activities testing was achieved by checkerboard method and found ceftazidime/avibactam-amikacin displayed synergism in 90% isolates. Ceftazidime/avibactam-colistin displayed partial synergistic in 43% isolates, and ceftazidime/avibactam-tigecycline displayed indifference in 67% isolates. In time-kill assays, antibiotics at 1-fold MIC were mixed with bacteria at 1 × 105 CFU/ml and Mueller-Hinton broth (MHB). Combinations of ceftazidime/avibactam with amikacin and tigecycline displayed better antibacterial effects than single drug. Ceftazidime/avibactam-colistin combination did not exhibit better effect than single drug. In KPC-Kp infections, susceptibility testing suggested that ceftazidime/avibactam may be considered as first-line choice. However, monotherapy is often inadequate in infection management. Thus, our study revealed that combination therapy including ceftazidime/avibactam colistin and ceftazidime/avibactam tigecycline may benefit than monotherapy in KPC-Kp treatment. Further pharmacokinetic/pharmacodynamic and mutant prevention concentration studies should be performed to optimize multidrug-regimens.

Colistin Resistance in Aeromonas spp.

The increase in the use of antimicrobials such as colistin for the treatment of infectious diseases has led to the appearance of Aeromonas strains resistant to this drug. However, resistance to colistin not only occurs in the clinical area but has also been determined in Aeromonas isolates from the environment or animals, which has been determined by the detection of mcr genes that confer a resistance mechanism to colistin. The variants mcr-1, mcr-3, and mcr-5 have been detected in the genus Aeromonas in animal, environmental, and human fluids samples. In this article, an overview of the resistance to colistin in Aeromonas is shown, as well as the generalities of this molecule and the recommended methods to determine colistin resistance to be used in some of the genus Aeromonas.

Hyaluronan/colistin polyelectrolyte complexes: Promising antiinfective drug delivery systems.

Nanotechnology-based modification of known antimicrobial agents is a rational and straightforward way to improve their safety and effectiveness. The aim of this study was to develop colistin (CT)-loaded polymeric carriers based on hyaluronic acid (HA) for potential application as antimicrobial agents against multi-resistant gram-negative microorganisms (including ESKAPE pathogens). CT-containing particles were obtained via a polyelectrolyte interaction between protonated CT amino groups and HA carboxyl groups (the CT-HA complex formation constant [logKCT-HA] was about 5.0). The resulting polyelectrolyte complexes had a size of 210-250 nm and a negative charge (ζ-potential -19 mV), with encapsulation and loading efficiencies of 100% and 20%, respectively. The developed CT delivery systems were characterized by modified release (45% and 85% of CT released in 15 and 60 min, respectively) compared to pure CT (100% CT released in 15 min). In vitro tests showed that the encapsulation of CT in polymer particles did not reduce its pharmacological activity; the minimum inhibitory concentrations of both encapsulated CT and pure CT were 1 µg/mL (against Pseudomonas aeruginosa).

Comparison of colistin-induced nephrotoxicity between two different formulations of colistin in critically ill patients: a retrospective cohort study.

BACKGROUND: Colistin is widely used in the treatment of nosocomial infections caused by carbapenem-resistant gram-negative bacilli (CR-GNB). Colistin-induced nephrotoxicity is one of the major adverse reactions during colistin treatment. Comparisons of colistin-induced nephrotoxicity between different formulations of colistin are rarely reported. METHODS: In this retrospective cohort study, we enrolled intensive care unit-admitted patients if they had culture isolates of CR-GNB and underwent intravenous treatment with colistin. The occurrence of acute kidney injury (AKI) during intravenous treatment with colistin was recorded. The occurrence of colistin-induced nephrotoxicity was compared between two formulations of colistin, Locolin®, and Colimycin®. Treatment outcomes associated with the occurrence of colistin-induced nephrotoxicity were also investigated. RESULTS: Among 195 patients, 95 who were treated with Locolin® and 100 who were treated with Colimycin® were included for analysis. Patients treated with Locolin® had a higher rate of occurrence of stage 2 (46.3% vs. 32%, p = 0.040) and stage 3 (29.5% vs. 13%, p = 0.005) AKI than did those treated with Colimycin®. In multivariate analysis, the presence of septic shock (adjusted odds ratio [aOR] 2.17, 95% confidence interval [CI] 1.10-4.26) and inappropriate colistin dosage (aOR 2.52, 95% CI 1.00-6.33) were clinical factors associated with colistin-induced nephrotoxicity. Treatment with Colimycin® was an independent factor associated with a lower risk of colistin-induced nephrotoxicity (aOR 0.37, 95% CI 0.18-0.77). The mortality rate was comparable between patients with and without colistin-induced nephrotoxicity. CONCLUSIONS: The risk of colistin-induced nephrotoxicity significantly varied in different formulations of colistin in critically ill patients. Colistin-induced nephrotoxicity was not associated with increased mortality rate.

Selective Bacterial Targeting and Infection-Triggered Release of Antibiotic Colistin Conjugates.

In order to render potent, but toxic antibiotics more selective, we have explored a novel conjugation strategy that includes drug accumulation followed by infection-triggered release of the drug. Bacterial targeting was achieved using a modified fragment of the human antimicrobial peptide ubiquicidin, as demonstrated by fluorophore-tagged variants. To limit the release of the effector colistin only to infection-related situations, we introduced a linker that was cleaved by neutrophil elastase (NE), an enzyme secreted by neutrophil granulocytes at infection sites. The linker carried an optimized sequence of amino acids that was required to assure sufficient cleavage efficiency. The antibacterial activity of five regioisomeric conjugates prepared by total synthesis was masked, but was released upon exposure to recombinant NE when the linker was attached to amino acids at the 1- or the 3-position of colistin. A proof-of-concept was achieved in co-cultures of primary human neutrophils and Escherichia coli that induced the secretion of NE, the release of free colistin, and an antibacterial efficacy that was equal to that of free colistin.

The MCR-3 inside linker appears as a facilitator of colistin resistance.

An evolving family of mobile colistin resistance (MCR) enzymes is threatening public health. However, the molecular mechanism by which the MCR enzyme as a rare member of lipid A-phosphoethanolamine (PEA) transferases gains the ability to confer phenotypic colistin resistance remains enigmatic. Here, we report an unusual example that genetic duplication and amplification produce a functional variant (Ah762) of MCR-3 in certain Aeromonas species. The lipid A-binding cavity of Ah762 is functionally defined. Intriguingly, we locate a hinge linker of Ah762 (termed Linker 59) that determines the MCR. Genetic and biochemical characterization reveals that Linker 59 behaves as a facilitator to render inactive MCR variants to regain the ability of colistin resistance. Along with molecular dynamics (MD) simulation, isothermal titration calorimetry (ITC) suggests that this facilitator guarantees the formation of substrate phosphatidylethanolamine (PE)-accessible pocket within MCR-3-like enzymes. Therefore, our finding defines an MCR-3 inside facilitator for colistin resistance.

A physicochemical assessment of the thermal stability of dextrin-colistin conjugates.

Attachment of polysaccharide carriers is increasingly being used to achieve precision delivery and improved effectiveness of protein and peptide drugs. Although it is clear that their clinical effectiveness relies on the purity and integrity of the conjugate in storage, as well as following administration, instability of polysaccharide-based conjugates can reduce the protective efficacy of the polymer, which may adversely affect the bioactive's potency. As a model, these studies used dextrin-colistin conjugates, with varying degrees of polymer modification (1, 2.5 and 7.5 mol% succinoylation) to assess the effect of storage temperature (- 20, 4, 21 and 37 °C) and duration (up to 12 months) on saccharide and colistin release and antimicrobial activity. Estimation of the proportion of saccharide release (by comparison of area under the curve from size exclusion chromatograms) was more pronounced at higher temperatures (up to 3 and 35% at - 20 °C and 37 °C, respectively after 12 months), however, repeated freeze-thaw did not produce any measurable release of saccharides, while addition of amylase (20, 100, 500 IU/L) caused rapid release of saccharides (> 70% total within 24 h). At all temperatures, conjugates containing the lowest degree of succinoylation released the highest proportion of free colistin, which increased with storage temperature, however no trend in saccharide release was observed. Despite the clear physical effects of prolonged storage, antimicrobial activity of all samples was only altered after storage at 37 °C for 12 months (> threefold decreased activity). These results demonstrate significant release of saccharides from dextrin-colistin conjugates during prolonged storage in buffered solution, especially at elevated temperature, which, in most cases, did not affect antimicrobial activity. These findings provide vital information about the structure-activity relationship of dextrin-colistin conjugates, prior to full-scale commercial development, which can subsequently be applied to other polysaccharide-protein and -peptide conjugates.

Tobramycin and Colistin display anti-inflammatory properties in CuFi-1 cystic fibrosis cell line.

Current cystic fibrosis (CF) treatment strategies are primarily focused on oral/inhaled anti-inflammatories and antibiotics, resulting in a considerable treatment burden for CF patients. Therefore, combination treatments consisting of anti-inflammatories with antibiotics could reduce the CF treatment burden. However, there is an imperative need to understand the potential drug-drug interactions of these combination treatments to determine their efficacy. Thus, this study aimed to determine the interactions of the anti-inflammatory agent Ibuprofen with each of the CF-approved inhaled antibiotics (Tobramycin, Colistin and its prodrug colistimethate sodium/Tadim) and anti-bacterial and anti-inflammatory efficacy. Chemical interactions of the Ibuprofen:antibiotic combinations were elucidated using High-Resolution Mass-Spectrometry (HRMS) and 1H NMR. HRMS showed pairing of Ibuprofen and Tobramycin, further confirmed by 1H NMR whilst no pairing was observed for either Ibuprofen:Colistin or Ibuprofen:Tadim combinations. The anti-bacterial activity of the combinations against Pseudomonas aeruginosa showed that neither paired nor non-paired Ibuprofen:antibiotic therapies altered the anti-bacterial activity. The anti-inflammatory efficacy of the combination therapies was next determined at two different concentrations (Low and High) using in vitro models of NuLi-1 (healthy) and CuFi-1 (CF) cell lines. Differential response in the anti-inflammatory efficacy of Ibuprofen:Tobramycin combination was observed between the two concentrations due to changes in the structural conformation of the paired Ibuprofen:Tobramycin complex at High concentration, confirmed by 1H NMR. In contrast, the non-pairing of the Ibuprofen:Colistin and Ibuprofen:Tadim combinations showed a significant decrease in IL-8 secretion at both the concentrations. Importantly, all antibiotics alone showed anti-inflammatory properties, highlighting the inherent anti-inflammatory properties of these antibiotics.

Revealing Insights into Natural Products Against mcr-1-Producing Bacteria.

Bacterial resistance has become a major global concern, affecting about 500, 000 individuals in 22 countries. Thus, it is clear that Gram-negative bacteria have been receiving more attention in this scenario. These bacteria perform several resistance mechanisms, such as modifying lipid A from lipopolysaccharides as a product of the mcr-1 gene expression. This gene was initially identified in animals; however, it quickly spread to humans, spreading to 70 countries. Mcr-1 gene attributes resistance to polymyxin B and colistin, which are drugs established as the last alternative to combat Enterobacteriaceae bacteria. Notwithstanding the prevalence and lack of antibiotic therapies for such bacteria, this article aimed to compile information about natural compounds against the resistance attributed by this gene, including the activity of isolated colistin or its associations with other antibiotics. Among the studies that evaluated colistin's synergistic action with other compounds, azidothymidine and isoalantholactone stood out. On the other hand, the paenipeptin 1 analog showed satisfactory activities when associated with other antibiotics. Besides, it is worth mentioning that molecular docking results between ostole and eugenol toward phosphoethanolamine transferase MCR-1 revealed that these compounds could interact with critical amino acid residues for the catalytic action of this enzyme. Based on this, natural agents' role is evident against infections caused by mcr-1-positive bacteria, directly contributing to the development of new effective pharmacotherapies.

Effects of Different Component Contents of Colistin Methanesulfonate on the Pharmacokinetics of Prodrug and Formed Colistin in Human.

PURPOSES: To evaluate the effects of component contents in different colistin methanesulfonate (CMS) formulas on their clinical pharmacokinetics of the prodrug CMS and the formed colistin. METHODS: Two CMS formulas (CTTQ and Parkedale) were investigated in a single dose, randomized, open-label, crossover study conducted in 18 healthy Chinese subjects. Both CMS formulas met the requirements of European Pharmacopoeia 9.2 with 12.1% difference in the two major active components (CMS A and CMS B). The PK parameters after a single intravenous infusion of CMS at 2.5 mg/kg were calculated and the steady-state plasma colistin concentrations (Css,avg) following multiple dosing, once every 12 h for 7 days, were simulated with the non-compartment model. RESULTS: The systemic exposure (AUC0-inf) of CMS were 59.49 ± 5.90 h·µg/mL and 51.09 ± 4.70 h·µg/mL, and the AUC0-inf of colistin were 15.39 ± 2.63 h·µg/mL and 12.36 ± 2.10 h·µg/mL for CTTQ and Parkedale, respectively. The ratios (90% CI) of geometric mean of AUC0-inf of CTTQ to Parkedale were 116.38% (112.95%, 119.91%) and 124.49% (120.76%, 128.35%) for CMS and colistin, respectively. The predicted Css,avg (95% CI) were 0.92 (0.85, 0.99) µg/mL and 0.74 (0.69, 0.79) µg/mL for CTTQ and Parkedale, respectively. CONCLUSION: The difference in component content in the two CMS formulas had a significant (P < 0.001) impact on the systemic exposure of colistin in human, thus, warranted essential considerations in clinical applications.